IC-ID certificate sample

Canada Certification and Approvals

Radio, Telecommunications Terminal Equipment (TTE) and all other electronic (digital) devices must comply with the Canadian standards. Radio Equipment usually requires Certification, whereas Terminal Equipment requires Registration (sometimes certified or registered together, in case of a cordless phone). A local person or company (legal entity) within Canada is required for certification. In case you don't have presence in Canada.

Each Company seeking Certification (the applicant), the manufacturer of the equipment (the factory or manufacturing site), the local representative (legal Canadian entity), Test lab (OATS or FAR) and Certification Body (CB) must be registered at IC and have a Company Number (CN) prior to Certification.

Industry Canada Radio Certification

Radio Equipment in Canada must comply with the Radio Standard Specifications (RSS), whereas the standards are categorized in Category I and II. Category I equipment requires Certification by a recognized Certification Body (CB) or by the Certification and Engineering Bereau of Industry Canada. LCS offers the service for Industry Canada Certification. Category II Equipment does not require Certification but the manufacturer or importer must ensure compliance with the appropriate standard(s); a test report shall be available and the equipment shall be properly labeled. Receivers can either be classified as Category I or II, whereas Category I Receivers are tunable to any frequency in the band 30~950 MHz, or are housed together with Category I transmitters, or is a scanning Receiver. All other Receivers are Category II Equipment.

Radio Equipment has been divided in different Types of Radio Equipment by Industry Canada, where some of the Radio Equipment is License Exempt . Testing is generally required for intentional and unintentional (conducted and radiated) emissions, and if applicable, also for Dynamic Frequency Selection (DFS), Specific Absorption Rate (SAR), and Hearing Aid Compatibility (HAC).

When applying for Certification, the ITU designation code(s) must be determined according to the TRC-43specification.

Certified Radio Equipment must be labeled with model number and proper IC ID: XXXXZ-YYYYYYYY and will be published on the IC website in the Radio Equipment List (REL).

Industry Canada Terminal Equipment Approval

Terminal Equipment in Canada must comply with the Industry Canada Terminal Standard Specifications (CS-03, part I:analogue; II: digital; III: terminals; IV: terminology; V:hearing aids; VI:ISDN; VII: modems and digital substrate equipment; VIII:DSL). Industry Canada maintains a list of network Network Connection methods, Equipment Categories , and types of Network Interfaces. Terminal Equipment Registration is based on a DoC procedure (self declaration). LCS offers the service for Terminal Equipment Registration according to all parts of the CS-03 standard. Approved Terminal Equipment must be labeled with model number and proper IC ID: XXXX-YYYYYY and will be published on the IC website in the Terminal Equipment List (TEL).

Industry Canada EMC Approval

Electronic Equipment in Canada must comply with the EMC and other requirements as specified in the Canadian Interference Causing Equipment Standards (IECS). For example, ITE equipment (digital apparatus) must comply with ICES-003 and labeled with: "This Class [*] digital apparatus complies with ICES-003" and "Cet appareil numerique de la clase [*] est conforme a la norme NMB-003 du Canada", where [*] refers to the applicable emissions, either Class A or B.

Industry Canada Broadcast Equipment Approval

Broadcast Equipment must comply with the Broadcasting Equipment Technical Standards (BETS), of which some are Broadcasting Certificate Exempt Radio Apparatus.

Safety and Health Approval

In addition, all Equipment must comply with the Electrical Safety requirements in Canada. Recognized approval marks in Canada include CSA, ETL, UL, which are also valid for the USA.

Contact with us Edison Xia QQ:863253430 Skype: Lucky.dog12 edison_xia(at)126.com

Looking forward to your enquire.

About Us

Shenzhen LCS Testing Compliance Laboratory Ltd. is an independent third-party testing laboratory based in Shenzhen China. LCS Testing Laboratories have been progressing steadily and continuously built in compliance with ISO/IEC 17025:2005 and operated by GUIDE 25 and EN 45001 Quality Standard.

LCS Testing Laboratory is recognized by several internationally recognized Certification Bodies and Notified Bodies: the UL, FCC/TCB, CEC, Industry Canada, VCCI, TIMCO, SIEMIC, EMCC, PHOENIX TESTLAB, Intertek, NEMKO, DEKRA, TUV, SAA approval, ILAC-MRA&CNAS(NO.L4595), CMA, CBTL, NVLAP, etc

With a team of professional engineers and technologists, who have the expertise and global experiences in type examinations and safety assessments, LCS Testing Laboratory provides dedicated and precise security control services to electromechanical devices manufacturers all over the world, in order to minimize the industrial hazards upon people and the environment.

LCS unique expertise and specialized resources and abundant experience lead us to realize the enormous responsibilities and expanding. Nowadays, LCS Testing Laboratory is the leader in the market due to its comparatively technical advantages and efficient localized services.

LCS services:

Europe CE mark, GS mark, EMC, LVD, R&TTE, MD, ERP, RoHS/WEEE Directive, IES files

North America  UL/cULus, cETLus, FCC, FDA, IC(Industry Canada), CEC, Energy Star, LM79/80

Australia and New Zealand  SAA Approvals, A-TICK,C-TICK,RCM mark, EMC, MEPS

Japan  MIC/TELEC, PSE, VCCI

Korea  KC mark, KCC, CB, MEPS

Singapore  SAFETY MARK

China  CCC/CQC

Taiwan  BSMI,SRRC

Middle East  Saudi Arabic SASO, Kuwait TER/TIR, Iraq CoC/Voc, IEC/ISO 17025 Report

Dustproof and Waterproof IPXX testing(IP43,IP54,IP65,IP67,IP68...)

Contact with us: